Overview Specifications Diagram Support Downloads Get A Quote  

California Instruments RP Series Specifications

Note: Specifications shown are valid over an ambient temperature range of 25°±5°C.

Controller
Model 2001RP 2003RP
Type Programmable Programmable
Controls Digital Encoders Digital Encoders
Readouts dual 4 digit LCD’s dual 4 digit LCD’s
Non Volatile Setups 1 (8) (with -OP1 option)  
Output
Model 2001RP 2003RP
Phases 1 3 (A, B, C)
Phase Angles   A=0° B=240° C=120
AC Power 2000VA 675VA Max per phase
Load Connection Floating neutral Rear panel terminal block / optional Universal front panel sockets Rear panel terminal block
Output : Voltage
Model 2001RP 2003RP
High range / Low Range 0-300 / 0-150 V RMS (except -AV and -LZ options) 0-270/0-135 V RMS
Accuracy ± 0.1 %FS @ 16Hz-100 Hz ± 0.1 %FS @ 16Hz-100 Hz
Accuracy ± 0.2%FS @ 100Hz-5000Hz ± 0.2%FS @ 100Hz-2000Hz
Resolution 0.1 V 0.1 V
Line & Load Regulation High V range    
Line & Load Regulation Low V range    
Load Regulation remote sense ± 0.1% FS remote sense, 16-500Hz ± 0.1 %FS²
Line Regulation 10 % Line change ± 0.02%FS ± 0.02%FS
T.H.D 16-100Hz 0.5 typ./1.0 max.% (into a resistive load) 16-100Hz 0.5 typ./1.0 max.% 100-2000Hz 1.0 typ./2.0 max.%
Output Noise < 0.1 V RMS typ. < 0.1 V RMS typ.
Note 2: Specifications apply over freq. ranges shown and above 5 % of V range.
Output : Frequency (specifications valid from 45 Hz to 500 Hz)
Model 2001RP 2003RP
Range    
Accuracy ± 0.02% ± 0.02%
Resolution below 100 Hz    
Resolution above 100 Hz    
Resolution 16.0Hz-80.0Hz 0.01 Hz 80.1Hz-800.0Hz 0.1 Hz 800Hz-5000Hz 1Hz 16.0Hz-80.0Hz 0.01 Hz 80.1Hz-800.0Hz 0.1 Hz 800Hz-5000Hz 1Hz
Output : Current
Model 2001RP 2003RP
Steady State Current High V range 6.7 A rms 2.5 A rms
Steady State Current Low V range 13.4 A rms 5.0 A rms
Peak Current High V range 22.2 A peak 7.5 A peak
Peak Current Low V range 44.5 A peak 15.0 A peak
Protection
Model 2001RP 2003RP
Current limit Mode Const. Current or Const. Volt Const. Current or Const. Volt
(Output shut off) Resolution 0.1 A rms 0.1 A rms
Over Temperature Output shut off Output shut off
Over Voltage Output shut off Output shut off
Input
Model 2001RP 2003RP
Line Voltage¹ 2 wire + GND 107/115V or 208/230V ± 10% V RMS 107/115V or 208/230V ± 10% V RMS
Line Current (fused) <35@96V, <30@115V, <15@230V A RMS <30@115V,<15@230V A RMS
Line Frequency 47 - 440 Hz 47 - 440 Hz
Holdup Time 10 ms 10 ms
Power Factor    
Isolation Input/output to Chassis 1350 V / 2200 V 1350 V / 2200 V
Measurements (* Requires Option -OP1)
Model 2001RP 2003RP
Current Range (RMS steady state) 0.000-4.000 / 0.00-15.00 A RMS Accuracy 0.2 % FS + 0.3 % rdng Resolution 0.001 / 0.01 A RMS 0.000-4.000 / 0.00-6.00 A RMS Accuracy 0.2 % FS + 0.3 % rdng Resolution 0.001 / 0.01 A RMS
Peak Current* Range Low/High 12.00 / 50.0A Accuracy 0.5% FS + 0.5% rdng Resolution 0.01 / 0.1A Range Low/High 0.00-12.00/0.0-20.0 A Accuracy 0.5% FS + 0.5% rdng Resolution 0.01 / 0.1 A
Voltage* Range 0 - 300 V RMS Accuracy 0.1% FS + 0.05% rdng Resolution 0.1 V RMS Range 0-300.0 V RMS Accuracy 0.1% FS + 0.05% rdng Resolution 0.1 V RMS
Power* Range Low/High 800 / 2000 W Accuracy 0.5 % FS Resolution 0.2 W Range 0.0-800.0 W Accuracy 0.5 % FS Resolution 0.2 W
Power Factor* Range 0.00 - 1.00 Resolution 0.01 Range 0.00 - 1.00 Resolution 0.01
Remote Control Options
Model 2001RP 2003RP
Interface RS232C and IEEE-488 IEEE Functions SH1, AH1, T8, L3, RL2 RS232C settings 19200,8,n,1 Command Language SCPI (Requires Option -OP1) RS232C and IEEE-488 IEEE Functions SH1, AH1, T8, L3, RL2 RS232C settings 19200,8,n,1 Command Language SCPI (Requires Option -OP1)
Remote Inhibit (Requires Option -OP1) Output shut down TTL in, active low BNC Output shut down TTL in, active low BNC
Function Strobe (Requires Option -OP1) On V or F change TTL out, active low BNC On V or F change TTL out, active low BNC
Physical
Model 2001RP 2003RP
Regulatory CE CE
Dimensions HxWxD 5.25 x 19 x 22 in 133 X 483 X 560 mm 5.25 x 19 x 22 in 133 X 483 X 560 mm
Weight (net) 73 / 33 lbs / kg 85 / 38.3 lbs / kg
Vibration and Shock Designed to meet NSTA-1A Designed to meet NSTA-1A
Temperature Operating 0 to 40 ° C Storage -40 to +85° C Operating 0 to 40 ° C Storage -40 to +85° C
 
RELATED LINKS

AC Product Selector

AC Modular Supply

Discontinued Products

Product Support

Contact Sales

SERVICE AGREEMENT
Service Agreement for all California Instruments AC except MX & FCS